Gr2 Gr7 Gr12 Titanium Reducer Pipe Jonit
Reducer pipe,titanium reducer pipe,Nickel reducer pipe Concentric, eccentric,NPS 1/4" - 24"(DN15-1200) GR2,GR7,GR12,N200/201,N6 100% of the X-ray detection (RT)
معرفی محصول
| gr2 gr7 gr12 titanium reducer pipe jonit |
----Specification of Reducer pipe----
Reducer | 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Reducer |
Size | Seamless 0010010 nbsp;reducer 0010010 nbsp;from 0010010 nbsp;Φ18-Φ114.3 0010010 nbsp;*(2.0-9.0) 0010010 nbsp;concentric 0010010 nbsp;、eccentric 0010010 nbsp;reducer 0010010 nbsp;and 0010010 nbsp;reducing 0010010 nbsp;swage |
the 0010010 nbsp;welding 0010010 nbsp;reducer 0010010 nbsp;fromΦ139.7-Φ1220*(2.0-30) 0010010 nbsp; concentric 0010010 nbsp;、eccentric 0010010 nbsp;reducer | |
Condition | （M） |
Grade | Gr1、Gr2、Gr3、Gr5、Gr7、Gr12、N4、N5、N6、 |
NO2200、NO2201、MONEL400、INCONEL 0010010 nbsp;600、ZR702 | |
Standard | ASME 0010010 nbsp;B16.9-2007 0010010 nbsp;、MSS 0010010 nbsp;SP-43 0010010 nbsp; 0010010 nbsp;、ASTM 0010010 nbsp;B363、GB/T12459-2005 |
GB/T13401-2005、 0010010 nbsp;HG/T3651-1999 0010010 nbsp;、GB/T27684-2011 | |
Technique | Seamless 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Extrusion 0010010 nbsp;、Buttwelding 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Seamless |
Surface finished | Sand Blasting 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Polishing 0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Pickling |
Quality Control | 100% X-RAY or Dye Penetrate Test |
Remarks | Produce 0010010 nbsp;the 0010010 nbsp;special 0010010 nbsp;size 0010010 nbsp;snd 0010010 nbsp;standard 0010010 nbsp;according 0010010 nbsp;to 0010010 nbsp;the 0010010 nbsp;customer 0010010 nbsp;request |
According 0010010 nbsp;to 0010010 nbsp;the 0010010 nbsp;drawing 0010010 nbsp;to 0010010 nbsp;processing |
---- Process of production for reducer pipe fitting----
Reducing pipe is a special kind of reducing pipe fitting. The cross-section radii of the two ends of this reducing pipe are different. The deformation characteristic of the reducer is to determine the diameter of tube billet according to the 0010010 nbsp;constant volume before and after the plastic deformation of the metal material. The diameter of tube billet 0010010 nbsp;is smaller than the diameter of the reducer. The deformation process of billet 0010010 nbsp;is controlled by the core mold, so that the inner arc is compressed. The metal movement is compensated to other parts that are thinned due to the diameter expansion, so as to obtain a reducer with an average wall thickness. The hot push forming concentric reducer pipe forming process uses a special reducer pusher, core mold and heating device to make 0010010 nbsp;tube billet 0010010 nbsp;set on the mold move forward under pushing 0010010 nbsp;of the pusher, and it is heated and expanded during the movement. Diameter and bend forming process. |
Note: When hydrogen content in the titanium pipe 0010010 nbsp;fitting 0010010 nbsp;is too high, the impact toughness and notched tensile strength will decrease due to brittleness. Therefore, it is generally stipulated that the hydrogen content in titanium fittings should not exceed 0.015%. To reduce the absorption of hydrogen, fingerprints, abrasions, grease and other residues should be cleaned before heat treatment. There is no water vapor in the heat treatment furnace. When the hydrogen content of titanium pipes exceeds the allowable value, vacuum annealing cleaning is required. |
----Quality Inspection---
Macro inspection of pipe fittings mainly inspects the following aspects: The inspection of manufacturing quality mainly inspects whether there are defects such as cracks, folds, heavy skins, trachoma, shrinkage holes, slag inclusions, pits, mechanical damage, welding damage, etc .; whether the size, roundness, shape, thickness deviation of the pipe meet Requirements. |
Inspection Method 100% of the X-ray detection (RT) surface penetrant inspection (PT) |
----Customer Visit----
تگ های محبوب: gr2 gr7 gr12 titanium reducer pipe jonit, China, manufacturers, suppliers, factory, customized, wholesale, low price, in stock
شما نیز ممکن است دوست داشته باشید
ارسال درخواست
